Products

dk series cnc EDM machine DK7763

① DRO Ruler ② Electronic Pump ③ Linear Guide

④ Inverter ⑤ High pressure Water Tank ⑥ Ball Screw

wire cut EDM machine PARAMETER

	Unit	DK7725	DK7732	DK7740	DK7750
Work table travel	mm	250*320	400*320	500*400	630*500
Work table dimensions	mm	340*500	600*450	790*510	900*630
Maximun load capacity	KG	200	450	650	850
Machine weight	KG	1000	1300	1600	2200
Machine dimensions	mm	148010101400	150010501650	185011001650	195013001650
Maximum cutting thickness	mm	400	500	500	500
Maximum cutting taper	mm	±3°\80mm	±3°\80mm	±3°-±30°\80mm	±3°-±30°\80mm
Effciency	mm²	200mm²/min	200mm²/min	200mm²/min	200mm²/min
Accuracy	Um	10	10	10	10
Supply Voltage	V	50HZ\220\380 ±10%	50HZ\220\380 ±10%	50HZ\220\380 ±10%	50HZ\220\380 ±10%
	Unit	DK7763	DK7780	DK77100	DK77120
Work table travel	mm	800*630	1000*800	1200*1000	1500*1200
Work table dimensions	mm	1160*780	1500*1000	1760*1200	1960*1500
Maximun load capacity	KG	1200	1600	2000	2500
Machine weight	KG	3200	6000	6500	7500
Machine dimensions	mm	210015002250	250021002300	330032502500	330032502500
Maximum cutting thickness	mm	700	700	800	1000
Maximum cutting taper	mm	±3°-±30°\80mm	±3°-±30°\80mm	±3°-±30°\80mm	±3°-±30°\80mm
Effciency	mm²	200mm²/min	200mm²/min	200mm²/min	200mm²/min
Accuracy	Um	10	10	10	10
Supply Voltage	V	50HZ\220\380 ±10%	50HZ\220\380 ±10%	50HZ\220\380 ±10%	50HZ\220\380 ±10%
Option
Taper:±6°,±15°,±30°,±45°
Linear Guide:X,Y Linear Guide
Servo motor
Multi cut function to reach better accyuacy and surface roughness
Thickness up to 1000mm
Color

Features of the cnc wire cut edm machine:

Special supporting design of the machine with high strength and heavy loading capacity.
The machine uses the V-shape long span and long guiding rail structure lined with steel which helps the stability.
The feeding wire part of the machine uses the driving system of gearwheel with lower noise and longer life.
The maximum diameter of molybdenum wire is <= 0.25mm.
The wire tube uses the chroming material with good wear resistance.
The cutting accuracy of all direction is less than 0.01mm.
Use high precision ball screw, which has high transmission efficiency, good positioning accuracy, long life and well synchronization performance.
Use the high precision guide rail with high strength, heavy loading capacity and low resistance.
High stability of the machine. The failure rate is almost 0.
Apply beakless soft reversing, which prolongs the service life of reversing key.
All the machine applies the high precision guide wheel appliance to enhance the accuracy of cutting.
All the machine-tools use the laser interferometer to test the accuracy. (Renishaw Laser Test System from the great Britain).